How do I access advanced settings on my Cogeco modem?

Article author
Cogeco Support
  • Updated

The advanced settings on your Cogeco modem allow you to perform actions such as setting a specific DNS server or enabling port-forwarding. See below for steps to log into your modem with a mobile device or computer.

Note: Before taking these steps, the device you’re using to log into your modem will need to be connected to your Wi-Fi network or connect directly to the modem via Ethernet.

Sagemcom F@st 3896

  1. In an Internet browser, go to http://192.168.40.1 to access the modem’s Administrator page.
  2. Log in with your admin username and password if you have set them up, or use the default credentials:
    • Username: "admin"
    • Password: the Gateway management password on the sticker on the back of the modem

Note: Most advanced features for the F@st 3896 are managed through the Cogeco Wi-Fi app.

Hitron CODA-4589

  1. In an Internet browser, go to http://192.168.0.1 to access the modem’s Administrator page.
  2. Log in with your admin username and password if you have set them up, or use the default credentials:
    • Username: “cusadmin”
    • Password: “Cogeco1!” or “password”

For more information on managing these settings, please refer to the modem's user manual.

ARRIS TG3452A

  1. In an Internet browser, go to http://192.168.0.1 to access the modem’s Administrator page.
  2. Log in with your admin username and password if you have set them up, or use the default credentials:
    • Username: “admin”
    • Password: the Preshared Key on the sticker on the back of the modem

For more information on managing these settings, please refer to the modem's user manual.

ARRIS TG2472

  1. In an Internet browser, go to http://192.168.0.1 to access the modem’s Administrator page.
  2. Log in with your admin username and password if you have set them up, or use the default credentials:
    • Username: "admin"
    • Password: "password"

For more information on managing these settings, please refer to the modem's user manual.

Cisco/Technicolor DPC3848

  1. In an Internet browser, go to http://192.168.0.1 to access the modem’s Administrator page.
  2. Log in with your admin username and password if you have set them up, or use the default credentials:
    • Username: [leave blank]
    • Password: [leave blank] or "password"

For more information on managing these settings, please refer to the modem's user manual.

Was this article helpful?

Comments

0 comments

Please sign in to leave a comment.