How do I replace my Cogeco SD receiver?

Article author
Cogeco support
  • Updated

To replace your standard-definition (SD) receiver, follow the steps below, or download a printable copy of the instructions.

Step 1: Remove your old equipment

  1. Unplug the coaxial cable from the back of the receiver.
  2. Unplug the power supply from the electrical outlet and from the back of the receiver.
  3. Unplug the cables connecting the receiver to the TV.

Step 2: Connect your SD receiver

  1. Connect the coaxial cable from your wall to the CABLE/RF-IN input of your SD receiver. Make sure the connections are finger-tight to prevent signal interference but don't use a wrench to tighten them as this can damage the connectors.
  2. Connect the new power supply from the receiver to an active wall outlet.
  3. Connect the other supplied coaxial cable from the TO TV/VCR (RF-OUT) output of the digital receiver to the CABLE/RF-IN input of your TV.
    • Alternatively, you can connect the RCA output of the digital receiver to the RCA input of your TV using your own RCA cable (not supplied by Cogeco).
    • Note the name of the coaxial or RCA input on your TV that is connected to the digital receiver (e.g. VIDEO-1, TV/CABLE or ANTENNA). Input names may vary by TV. If required, check your TV manual for more information.

Step 3: Confirm your digital receiver has activated

  1. Once your box is connected to coax and power, it will automatically start the initialization process. This process could take up to 30 minutes to complete. Your receiver will shut down automatically following completion.
  2. Press the INPUT or SOURCE button on your TV’s remote control and select the video input that connects your TV to the digital receiver (e.g. VIDEO-1, TV/CABLE or ANTENNA).
    • Note: If you are using the coaxial cables, your TV will also need to be on channel 3.
  3. Turn your receiver on by pressing the CBL button followed by the PWR button on your Cogeco remote control.
  4. Select a channel you subscribe to using your Cogeco remote control. You will know that your receiver is activated when programming is displayed on your TV screen.

If the box did not activate successfully, follow these steps:

  1. Log in to My Account.
  2. Select Equipment.
  3. Locate your receiver under Current equipment.
  4. Select the Activate button, and a signal will be sent to your receiver.

Don't have a My Account profile yet? Create one today.

If programming is still not being displayed, please contact us (see Residential or Business contacts).

Step 4: Return your old receiver

Learn how to return your equipment.

Good to know:

Self-Install Support

If you are having difficulties with your installation, feel free to call us at our Self-Install Support line to speak to an agent: 1-833-845-0064.

Was this article helpful?



Please sign in to leave a comment.